Fenix C6 V3.0 | USB-C | 1500 Lumens | Magnetic Base
Over the years, Fenix C6 has been upgraded and re-designed to fit and function perfectly as per the latest technology and usage. Fenix C6 is a Professional Custom Series First Product, Designed for the Indian/African region. Introducing the Fenix C6 Version 3.0, a 2021 upgraded model with maximum Lumens of 1500 Lumens, bright output with a Luminus SST40 LED serving up to 50,000 Hours. The Fenix C6 V3 is powered by one Fenix ARB-L18-2600mAh Rechargeable Lithium-Ion Battery, Included. It's a high-performance compact design LED Torch ranging up to 300m of Beam Distance with an In-built USB C-Type Rechargeable port. With the latest C-Type port, it enables fast recharging which takes about just 2-3hours to fully rechargeable the TorchLight. In no time your torch is in full power to serve your need. The special feature in this version is the magnetic base, which enables ease and hands-free Lighting. Perfect compact pocket-sized work torch, for industrial and outdoor usage.
1500 Lumens maximum output
Maximum Candela: 22500
Rechargeable C-Type USB | Fast Charging
Charging Current - 2 amps Max.
Rechargeable Battery Included: Fenix ARB-L18-2600mAh Lithium-Ion
300m Beam Distance
Magnetic Base / Magnet at the Tail for Hands-Free usage
A6061-T6 Aluminium Alloy Body
HAIII Anodic Oxide Finish
Rugged, Reliable Tough Torch with IP68 Rating
Intelligent Over Heat Protection
Single Switch Operation Button
Battery Level Indicator
6 Output Operations:
Low Output: 30 Lumens | 54 Hours | 45m
Medium Output: 100 Lumens | 17 Hours | 85m
High Output: 400 Lumens | 4 Hours | 165m
Turbo Output: 1500 Lumens | 1 Hour* | 300m
Strobe: 1500 Lumens
SOS: 100 Lumens
Included: Rechargeable Lithium-Ion Battery Fenix ARB-L18-2600mAh
133 mm x 32 mm x 23 mm
Length: 133 mm
Housing Diameter: 23 mm
Diameter on Main Part: 32 mm
Weight: 103 g (Without Battery)
Fenix C6 V3 Torch
Fenix ARB-L18-2600mAh Rechargeable Li-ion Battery
USB C-Type Charging Cable
To turn the Torch on or off, press and hold the button for about half a second or two. After turning on, to switch between the various modes, single click on the switch to go from Low → Mid → High → Turbo. (General Mode). For the SOS and Strobe Mode, Press and hold the button for 1.2 seconds and press the button once to cycle between Strobe → SOS. (Flash Mode)
Strobe: From the off state, hold the button for 1.2 seconds. The model will remember the last selected brightness level in the general line of modes. When you turn it on again, this previously used level will be activated. When switched off in any of the flash modes, the Torch is activated in the general mode.
Lock: with the light off, press the button twice for half a second to lock the Torch, the indicator flashes twice at low. As a result, the lantern is blocked. To unlock, with the light off, double-click for 0.5 seconds to unlock. The Torch is activated at the lowest brightness.
Intelligent Over Heat Protection:
The Fenix C6 V3 has been built with smart technology to protect the battery and torch from over-heating. If you use the high brightness mode for a long time, heat is released (Strong bright light emits Heat). When the body reaches a temperature of 60°c or higher, the default brightness is reduced to reduce the temperature. As soon as the temperature falls below 60°c, it is possible to return to the required high brightness mode again.
Battery Level Indicator:
The green light is on: a good charge level of 100% - 85%.
Flashing green light: sufficient 85% - 50%.
The red light comes on low 50% - 25%.
Flashing red light: critical value 25% - 0%.
Note: This option only works with the Fenix ARB-L18 18650 series battery.